Steel weight calculator

Member entry

Member weight

–

Mass per metre
–
Weight per piece
–
Total weight
–
Browse UAE steel sections

Material list

Metric · kg, t, m, mm

Itemkg/mLength (m)QtyWeight (kg)Remove

No members added

Material list total0.00 kg (0.000 t)

How to calculate steel weight

The weight of any steel member is its cross-sectional area multiplied by its length and the density of steel, 7,850 kg/m³:

Weight (kg) = Area (mm²) × Length (m) × 0.00785

For rolled and hollow sections, the mass per metre is listed in the section tables, so the weight is simply kg/m × length. The calculator lists the sections available in the UAE market, with masses from BS 4-1 (UB, UC, bearing piles, channels), EN 10365 and Euronorm 19-57 (IPE, HE, IPN), DIN 1026 (UPN), JIS G 3192 (H sections), BS 4848-4 (angles), EN 10210 (SHS, RHS), ANSI B36.10 (pipe) and ASTM A6 (W shapes).

Steel weight formulas by shape

ShapeArea A (mm²)
Plate and flat barwidth × thickness
Round barπ × d² / 4
Circular hollow section (CHS)π × t × (D − t)
Square and rectangular hollow section (SHS, RHS)2t(B + H − 2t) − (4 − π)(ro² − ri²), hot-finished corners ro = 1.5t, ri = t (EN 10210)
Square barside²
Angleabout t × (a + b − t); table values include the root and toe radii

Mass per metre (kg/m) = A × 0.00785. Weight of one piece = kg/m × length.

Weight of common steel beams per metre

SizeIPE (kg/m)HEA (kg/m)HEB (kg/m)
20022.442.361.3
24030.760.383.2
30042.288.3117
36057.1112142
40066.3125155
50090.7155187
600122178212

From member weight to steel structure tonnage

Member weights are the start of a steel quantity estimate. Connections, base plates, stiffeners and bolts typically add 5 to 15 percent to the main member weight, depending on the structure. The steel tonnage of a building, warehouse or bridge is set by its structural steel design: an optimised design reduces the weight every fabricator prices. See our steel quantity take-off service and our guide to steel weight calculation.

Frequently asked questions

How do you calculate the weight of steel?

Weight equals the cross-sectional area multiplied by the length and the density of steel, 7,850 kg/m³. With the area in mm² and the length in metres, weight (kg) = area × length × 0.00785. For rolled sections such as IPE, HEA, HEB, UB, UC and W beams, the mass per metre (kg/m) is taken from the standard section tables and multiplied by the length.

What is the density of steel used in the calculator?

The calculator uses 7,850 kg/m³, the density of structural carbon steel used in EN 1991-1-1 and in steel section tables. Stainless steel is slightly heavier, about 7,900 to 8,000 kg/m³.

How do you calculate the weight of a steel plate?

Multiply length (m) × width (mm) × thickness (mm) × 0.00785. For example, a 2 m × 1,000 mm × 10 mm plate weighs 2 × 1,000 × 10 × 0.00785 = 157 kg.

What is the weight of IPE, HEA and HEB beams per metre?

Standard values include IPE 200 at 22.4 kg/m, IPE 300 at 42.2 kg/m, HEA 200 at 42.3 kg/m, HEA 300 at 88.3 kg/m, HEB 200 at 61.3 kg/m and HEB 300 at 117 kg/m. Select any size in the calculator for its mass per metre.

How is the weight of SHS, RHS and CHS hollow sections calculated?

The calculator uses the tabulated masses of hot-finished hollow sections to EN 10210 and pipe to ANSI B36.10. They follow area = π × t × (D − t) for circular sections, and 2t(B + H − 2t) less the rounded corners for square and rectangular sections, with corner radii of 1.5t outside and t inside. For example, SHS 100 × 100 × 5 weighs 14.7 kg/m.

Can I use the weight for steel quantity take-off and pricing?

The calculator gives the theoretical weight of the members. A full steel quantity take-off also includes connections, plates, bolts and allowances, usually 5 to 15 percent of the main member weight. For an accurate tonnage, the structure must first be designed.