Steel design codes and loads we design to
Each project names its design code. These pages explain how our engineers apply AISC 360, Eurocode 3, BS 5950 and the Dubai Building Code, and how wind, seismic and fire are handled in the UAE.

Wrenze Steel designs to the code the project specifies, with loads to ASCE 7-16 or the code named in the specification, and the requirements of Dubai Municipality and the other emirates. See our structural steel design service.
Steel design codes

AISC 360
Steel design to AISC 360 by LRFD or ASD: stability by the direct analysis method, member checks for tension, compression, flexure, shear and combined forces, bolted and welded connections and HSS joints, with AISC 341 where the seismic design requires it.

Eurocode 3 (EN 1993)
Steel design to Eurocode 3: cross-section classes, partial factors, global analysis and imperfections, member buckling to EN 1993-1-1 and joints to EN 1993-1-8, with the national annex the project names, for UAE projects specified to Eurocode and for projects abroad.

BS 5950 and BS EN
Steel design to BS 5950-1 for projects whose specification still names it: load factors, design strength py, section classification, buckling and combined checks, BS 6399 loads and BS 4 sections, and the transition to BS EN 1993 for new and extended buildings.

Dubai Building Code
Steel structure design for Dubai under the Dubai Building Code: the design basis for wind, seismic, temperature and fire, steel design to AISC 360 with ASCE 7-16 loads, and the structural submission to Dubai Municipality and the other Dubai authorities through to approval.
Loads and fire

Wind loads
Wind load calculation and design for steel structures in the UAE to ASCE 7-16 Chapters 26 to 31: basic wind speed and exposure, main frame and cladding pressures, uplift on light roofs and canopies, open structures, and wind tunnel data for tall and unusual buildings.

Seismic design
Seismic design of steel structures in the UAE to ASCE 7-16 Chapters 11 and 12: site class and spectral values, Seismic Design Category, choice of lateral system and R factor, equivalent lateral force and response spectrum analysis, drift, and AISC 341 detailing of braced and moment frames.

Fire protection design
The structural side of steel fire protection in Dubai and the UAE: the fire resistance periods set by the UAE Fire and Life Safety Code, member utilisation and critical temperature, section factors, the choice of intumescent coating, boards or sprayed protection, and the inputs the steel designer provides.
To confirm the design basis for your project, contact our engineers.
