Wrenze Steel provides steel structure design services in Ras Al Khaimah for real estate developers, architects and engineering consultancies, contractors and steel fabricators. Our work in the emirate includes steel structure works for a resort hotel, the steel bridge between two hotel towers, canopies for a hotel on Al Marjan Island, steel structures at a heritage village and underground steel structures for a pods park. We serve Ras Al Khaimah from our office in Dubai Silicon Oasis.
Our services as a steel structure design company in Ras Al Khaimah
- Structural steel design and analysis for buildings, hotels and special structures
- Steel connection design, including base plates and anchorage to concrete
- Steel shop drawings and detailing for fabrication and erection
- Warehouse, PEB and mezzanine design for industrial sites
- Canopies, pergolas, shading structures and rooftop steel
- Steel design verification and third-party review
- Structural assessment and strengthening of existing steel
Clients looking for steel design in RAK usually need one of three things: a full steel design from the architectural drawings, connection design and shop drawings for a fabricator, or a check of a steel design prepared by others. We work as a steel structure consultant for Ras Al Khaimah projects in all three roles.
Steel structure design in Ras Al Khaimah: coastal and island sites
Much of the construction in Ras Al Khaimah sits on the coast, on Al Marjan Island or along the Al Hamra waterfront. These sites set three conditions that shape the steel design.
Wind exposure. An open coastal site has little shelter, and wind speeds rise with height. Rooftop canopies, open pergolas and light shading structures are often governed by wind uplift and sway rather than by their own weight, so members and connections are designed for load in both directions. Wind actions are taken as set by the project specification and the authority.
Corrosion protection. Salt air is aggressive to carbon steel. The coating system, whether paint, hot-dip galvanising or both, is chosen for the corrosivity category set in the specification, commonly with reference to ISO 12944. The detailing matters as much as the coating: hollow sections are sealed or drained, joints avoid pockets where water can stand, and stainless fixings are isolated from carbon steel to avoid galvanic corrosion.
Ground conditions. Island and waterfront sites can have high groundwater and variable ground. Foundations are designed by the foundation designer, and we coordinate with them: we give the support reactions, the base plate and anchor bolt layout, and the base fixity assumed in our analysis, so the steel and the foundations are designed to the same model. Steel structures below ground are also checked for earth pressure, groundwater and buoyancy.
Hospitality and resort steel on Al Marjan Island
Hotel and resort projects use steel for the structures guests see: entrance canopies, roof canopies, pergolas, pool-deck shading, feature stairs and link bridges. These are exposed, so member sizes and connections are part of the architecture as well as the engineering. Slender columns and long beams need a clear stability system, either rigid connections or discreet bracing, and canopies fixed to a concrete hotel frame need their anchors, embedded plates and edge distances designed with the same care as the steel. See our canopy and solar structures and bridge projects for related work.
Approvals in Ras Al Khaimah
Steel structure designs in Ras Al Khaimah are approved by the RAK municipality and the relevant authority for the site, usually through the project consultant. We prepare the steel design calculations and drawings for submission, with the support reactions for the foundation design, and answer the comments on the steel design until it is accepted.
How a project runs
- You send the architectural drawings, the specification and any site or soil information.
- We agree the scope, the deliverables, the programme and the fee.
- We set the loads, the structural system and the corrosion protection basis with the consultant.
- We complete the analysis, member design and connection design.
- We issue the calculations and drawings for review and answer the comments.
- When included, our detailers prepare the shop drawings and erection drawings for fabrication.
Projects in Ras Al Khaimah
- InterContinental hotel steel structure works, Ras Al Khaimah. RAK Properties, with P&T Architects & Engineers Ltd as consultant. Steel structural design.
- Twin Tower DoubleTree connecting bridge, Ras Al Khaimah. Designers Engineering Consultants as client and consultant. Structural design of the steel bridge linking the two hotel towers, its supports and its interface with the towers.
- Al Jazirat Al Hamra Heritage Village, Ras Al Khaimah. Atkins as client and consultant. Structural design and detailing of steel structures at the village.
- Hampton by Hilton, Al Marjan Island. JT&Partners Architectural and Engineering Consultants as consultant, with Webb Yates Engineers as structural consultant. Structural design of an entrance canopy and two roof canopies.
- 20 pods park, Ras Al Khaimah. Armadilla as client and consultant. Structural design of the underground steel structures.
About Wrenze Steel
- Our engineers hold Dubai Municipality practice certificates, and we prepare Dubai Municipality submissions through to approval.
- A steel structure design consultancy: one team handles structural design, connection design and detailing.
- 96 projects completed across the UAE and the GCC.
- Our office is in Dubai Silicon Oasis, and we work across the UAE and the GCC.
Related pages
Steel structure design in Sharjah and the Northern Emirates · Steel structure design in Dubai · Steel structure types we design
To start a project in Ras Al Khaimah, contact our engineers or call +971 54 358 2558.






