Unequal angle sizes and weights
Unequal angles to BS 4848-4 (now EN 10056-1), used for bracing, lintels, cleats and edge trims.
Unequal angles
Angles · BS 4848-4 · 42 sizes
| Size (mm) | t (mm) | kg/m | A (cm²) |
|---|---|---|---|
| L 65x50 | 5 | 4.35 | 5.54 |
| L 65x50 | 6 | 5.16 | 6.58 |
| L 65x50 | 8 | 6.75 | 8.6 |
| L 75x50 | 6 | 5.65 | 7.19 |
| L 75x50 | 8 | 7.39 | 9.41 |
| L 75x50 | 10 | 9.07 | 11.6 |
| L 80x60 | 6 | 6.37 | 8.11 |
| L 80x60 | 7 | 7.36 | 9.38 |
| L 80x60 | 8 | 8.34 | 10.6 |
| L 100x50 | 6 | 6.85 | 8.73 |
| L 100x50 | 8 | 8.99 | 11.4 |
| L 100x50 | 10 | 11.1 | 14.1 |
| L 100x65 | 7 | 8.77 | 11.2 |
| L 100x65 | 8 | 9.94 | 12.7 |
| L 100x65 | 10 | 12.3 | 15.6 |
| L 100x75 | 7 | 9.32 | 11.9 |
| L 100x75 | 8 | 10.6 | 13.5 |
| L 100x75 | 10 | 13 | 16.6 |
| L 100x75 | 12 | 15.4 | 19.7 |
| L 120x80 | 8 | 12.2 | 15.5 |
| L 120x80 | 10 | 15 | 19.1 |
| L 120x80 | 12 | 17.8 | 22.7 |
| L 120x80 | 14 | 20.5 | 26.2 |
| L 125x75 | 8 | 12.2 | 15.5 |
| L 125x75 | 10 | 15 | 19.1 |
| L 125x75 | 12 | 17.8 | 22.7 |
| L 150x75 | 10 | 17 | 21.6 |
| L 150x75 | 12 | 20.2 | 25.7 |
| L 150x75 | 15 | 24.8 | 31.6 |
| L 150x90 | 10 | 18.2 | 23.2 |
| L 150x90 | 12 | 21.6 | 27.5 |
| L 150x90 | 15 | 26.6 | 33.9 |
| L 150x100 | 10 | 19 | 24.2 |
| L 150x100 | 12 | 22.6 | 28.7 |
| L 150x100 | 14 | 26.1 | 33.2 |
| L 150x100 | 15 | 27.8 | 35.4 |
| L 200x100 | 10 | 23 | 29.2 |
| L 200x100 | 12 | 27.3 | 34.8 |
| L 200x100 | 15 | 33.7 | 43 |
| L 200x150 | 12 | 32 | 40.8 |
| L 200x150 | 15 | 39.6 | 50.5 |
| L 200x150 | 18 | 47.1 | 60 |
No sizes match your search.
Weights are nominal masses from the section tables. Availability of each size depends on stock at the time of order. For the weight of a length or a full material list, use our steel weight calculator; for section selection and design, see our structural steel design service.
