Billboard structure design in Dubai is wind engineering first: a large face held high in the air, on a structure that weighs little compared with the force the wind puts on it. Wrenze Steel provides structural steel design of billboards and advertising structures in Dubai and across the UAE, for real estate developers, advertising and media companies, architects and engineering consultancies, signage contractors and steel fabricators. We design the columns, the head frames and face framing, the bracing, the access walkways and ladders, the connections, the base plates and anchorage, and issue the reactions for the foundation design.
Billboard structure design in Dubai: the types we design
- Unipole billboards: a single tubular or built-up column carrying a single, double or triangular face
- Multi-post and roadside boards: boards on two or more columns along roads and highways
- Large-format boards: deep, braced frames for very large faces beside highways and junctions
- Rooftop billboards: boards on building roofs, carried on a grillage that spreads the load
- Wall-mounted billboards and banners: frames fixed to building facades and parapets
- LED screen structures: frames for digital screens, including curved and corner screens
- Pylon and totem signs: freestanding signs at malls, petrol stations, developments and community entrances
- Construction hoardings: temporary site hoardings with graphics, designed for wind on a long solid face
Wind on billboards
A billboard is a sail. Its self-weight is small compared with its face area, so wind governs nearly every member, connection and foundation:
- Force coefficients for solid freestanding signs from ASCE 7-16, depending on the aspect ratio and the clearance under the board
- Offset wind: ASCE 7-16 also applies the resultant towards one end of the face, creating torsion that often governs unipoles
- Oblique wind on V-shaped and triangular boards
- Site exposure: open highway sites and rooftop positions see higher wind speeds than sheltered streets
- Dynamic response for tall, light structures, checked for gust effects and vibration
Seismic loads are combined to ASCE 7-16, and maintenance loads on the walkways are added.
Overturning, bases and foundations
The overturning moment from wind becomes large tension and compression at the column bases. We design the base plates, anchor bolts and stiffeners for combined tension, shear and moment, with the anchorage designed to ACI 318 Chapter 17, and issue the base reactions for the foundation designer, or design the pad or pile foundation where it is in our scope. Large boards use a deep two-layer braced frame, which resists overturning far more efficiently than a single row of posts.
Fatigue and connections
Billboards are loaded by every gust for their whole life. Welded details at the base plate, column splices and head frame connections are checked for fatigue to AISC 360 Appendix 3, and detailed with stiffened base plates, full penetration welds where needed and smooth transitions that perform well under repeated stress. Welds are designed to AWS D1.1, and splices are placed for transport and lifting.
Faces, LED screens and access
The face frame must stay flat so printed faces and LED modules sit true. LED screens add weight, cabinets and cooling equipment, and suppliers set tight deflection limits. We design the face framing for these limits and for the screen’s weight and eccentricity. Walkways, ladders, safety rails and lighting brackets are designed with the structure, so crews can install and change faces safely.
Rooftop and wall-mounted billboards
A billboard on a building adds wind, overturning and seismic load to a structure that was not designed for it. We check the roof slab, beams and columns at each support, and the building’s lateral system for the extra forces at roof level, and spread the loads with a steel grillage where the supports are far apart. Anchorage into the existing concrete is designed to ACI 318 Chapter 17, with fixings detailed so the roof waterproofing can be made good. Wall-mounted boards and banners are fixed through brackets designed for the eccentric weight of the frame and for wind pressure and suction on the face. See our steel structure assessment service for checks of the existing building.
Durability
Billboards stand exposed to sun, sand, humidity and, near the coast, salt air. We specify hot-dip galvanizing or a coating system for the exposure, sealed or drained hollow columns, and details that shed water and sand at the base.
What our billboard structure design consultants deliver
- A design basis covering the board type and size, site exposure, wind cases and face or screen loads
- Structural calculations for the columns, frames, bracing, walkways and bases, including fatigue checks
- Connection designs for the splices, head frame, bracing and base plates and anchor bolts
- Design drawings: general arrangement, elevations, sections and connection details
- Base reactions for the foundation designer, or the foundation design where it is in scope
- Calculations and drawings for Dubai Municipality, the advertising permit authority or the authority of the project’s emirate, with responses to comments
How a billboard project runs
- You send the board size, height and type, the site location and the face or screen details.
- We agree the scope and the programme.
- We propose the structural form: unipole, multi-post or braced frame.
- We complete the analysis, fatigue checks, member design and connection design.
- We issue the calculations and drawings for approval and answer the comments.
Billboard and advertising structure projects
For a 75 m by 24 m street advertising board in Dubai, Wrenze Steel carried out the steel structure design, connection design and 3D modelling of a deep two-layer braced steel frame: wind pressures and force coefficients for a freestanding signboard to ASCE 7-16, overturning resisted through the depth of the frame, longitudinal bracing against racking, face deflection limits, wind-induced vibration checks, access walkways and base anchorage for the large overturning tension. Related wind-governed structures include our rooftop steel structures and sculpture steel structure design.
About Wrenze Steel
- Our engineers hold Dubai Municipality practice certificates, and we prepare Dubai Municipality submissions through to approval.
- A steel structure design consultancy: billboards, signage and wind-governed special structures are part of our work alongside buildings, bridges and industrial structures.
- 96 projects completed across the UAE and the GCC.
- Our office is in Dubai Silicon Oasis, and we work across the UAE and the GCC.
Related pages
Rooftop steel structure design · Base plate and anchor bolt design · Sculpture steel structure design · Steel structure design in Dubai · All steel structure types
For a billboard, LED screen or advertising structure, contact our engineers.

